Counterbalance electric forklift is a core handling equipment widely used in warehousing, manufacturing and logistics scenarios, whose service life is closely related to the overall operation cost and work efficiency of the enterprise. Reasonable maintenance and standardized operation can effectively reduce the failure rate of the equipment, avoid unnecessary downtime loss, and maximize the use value of the equipment.
Before each formal operation, operators should complete a full range of appearance and function inspection. Check the wear degree of driving wheels and load wheels, confirm there is no obvious crack or deformation on the fork and pallet backrest, check that all lines of the electric system are intact without exposed damage, confirm the battery power is sufficient and the housing has no liquid leakage. After that, test the braking, steering, lifting and tilting functions under no-load condition, and confirm all indicators are normal before entering the formal operation link. Overload operation in any situation is not allowed.
Operators should follow the operation specification strictly in daily work. Avoid sharp steering, sudden braking and violent collision with goods or shelves during driving, do not lift or unload goods beyond the rated load of the equipment. When driving on the ramp, keep the load facing the uphill direction, and never drive the forklift transversely on the slope. When the equipment needs to stop for more than 10 minutes, pull the handbrake, turn off the working switch and cut off the unnecessary power supply to avoid unnecessary power loss.

Arrange special personnel to carry out regular professional maintenance for the equipment according to the specified cycle. For the power battery part, follow the correct charging process, avoid overcharge and over-discharge, clean the dust on the battery surface regularly, and keep the heat dissipation channel unblocked. Check the hydraulic oil level and sealing condition of the hydraulic system regularly, replenish or replace the hydraulic oil according to the specified cycle, and add appropriate lubricant to all movable hinge points to reduce wear.
When the equipment needs to be stored for a long time, it should be parked in a dry, ventilated place without corrosive gas, adjust the battery power to 50% to 70% for storage, and complete a supplementary charge every month. Jianshu New Energy focuses on BYD electric forklift, and we can provide customers with full-cycle operation and maintenance guidance services. For related consultation, please send email to [email protected].
.jpg)
