Counterbalance forklifts are widely applied in warehouse storage, factory logistics, port cargo handling and other scenarios, as the core equipment for efficient short-distance material transport. Mastering systematic safety essentials can effectively reduce operation risks, protect operators’ personal safety and avoid unnecessary property loss.
First, complete full pre-operation inspection before starting any task. Before turning on the device, operators need to check the integrity of the overhead guard, the flexibility of brake and steering system, the remaining battery level, the wear condition of forks and wheels, and confirm there is no leakage or abnormal heating of the power system. Never operate the counterbalance forklift with hidden faults, and report any abnormal situation to the management personnel in time before starting work.
Second, follow strict operation specifications in the whole driving and loading-unloading process. Operators must hold corresponding valid operation certificates before taking posts. Do not exceed the rated load limit, and avoid partial load or unbalanced load placement that may cause side tipping. When driving on flat roads, keep the forks 10 to 20 cm above the ground, tilt the mast backward properly to fix the goods. Do not carry extra people on the forklift body, and never lift personnel by using the forks without dedicated safety work platforms. When passing corners, blind areas or intersections, honk in advance and slow down to confirm no obstacles or passing personnel ahead. When driving on slopes, keep the load facing upward, do not turn on the slope to avoid rollover risk.

Third, follow safety rules for parking and daily maintenance. After finishing work, park the counterbalance forklift on the flat designated area, lower the forks completely to the ground, pull the hand brake tightly, cut off the power supply, and do not leave the vehicle with the goods lifted. For regular maintenance, arrange professional personnel to check the circuit and power system regularly, keep the vehicle body clean and avoid short circuit caused by accumulated sundries.

As a professional new energy forklift service provider, Jianshu New Energy focuses on BYD electric forklifts, and provides full set of safety training and operation guidance services for users. For any related consultation, please send email to [email protected] for professional support.
