As the logistics and warehousing industry continues to pursue low-carbon operation, electric forklifts have become one of the most widely used material handling equipment in indoor working scenarios in recent years. Mastering correct use and management knowledge can help enterprises give full play to the performance of such equipment and create higher operation value.

Core Performance Characteristics of Electric Forklifts

Different from traditional internal combustion handling equipment, electric forklifts are driven by on-board power units, which will not produce exhaust gas that pollutes the indoor working environment, and the overall operation noise is kept at a low level, which is suitable for closed warehouses, cold storage, food and pharmaceutical storage areas and other scenarios that put forward strict requirements for working environment. The average energy consumption per hour of such equipment is lower than that of internal combustion products of the same load level, and the daily operation cost is relatively controllable for long-term use.

Standard Electric Forklift Operation Requirements

Before each startup, operators need to check the remaining power status, brake sensitivity, hydraulic lifting part flexibility and tire surface condition first, and start operation after confirming that there is no abnormal situation. During the moving process, the equipment should be operated according to the rated load weight, avoid overloading for a long time, slow down in advance when turning and passing through narrow aisles, and do not perform sharp steering actions on the ramp. Operators need to receive basic operation training in advance, and do not carry unrelated personnel on the working equipment during the whole process.

Conventional Daily Maintenance Points

For the power unit of electric forklifts, operators should avoid deep discharge below the safe power level during daily use, follow the standard charging process to avoid long-term overcharging, and regularly clean the dust and impurities on the surface of the power interface to keep the conduction state stable. The wear degree of walking tires and the sealing condition of hydraulic pipelines should be checked at regular intervals, and the equipment should be parked in the designated parking area, pull up the hand brake and cut off the main power supply after each use. Following the above operation and maintenance specifications can effectively reduce the failure rate of electric forklifts in daily use, extend the overall service life of the equipment, and support the stable operation of the whole warehouse material handling link.