Printing factories have high requirements for the cleanliness, stability and operation safety of material handling links, especially for the transfer of large paper rolls, which are core raw materials for production. Electric forklifts are widely used in such scenarios for their zero-emission, low-noise and smooth operation characteristics, and targeted practical operation arrangements can further give full play to the use value of the equipment.

First, make proper load matching and attachment selection according to the specifications of on-site paper rolls. The weight of paper rolls for different printing scenarios varies from hundreds of kilograms to several tons, operators need to check the rated load parameter of the electric forklift before each batch of handling work, and do not carry out overloaded operations. It is recommended to select the matching non-slip clamping attachment according to the diameter and width of the common paper rolls on site, adjust the clamping force within the reasonable range, so as to avoid crushing the paper core or leaving obvious indentation on the surface of the raw printing paper, which will affect the quality of subsequent printing products.

Second, adjust the operation mode to adapt to the special working conditions of the printing workshop. The internal passage of the printing workshop often has special facilities such as wiring grooves, humidity control areas and temporary material stacking points, operators need to confirm the turning radius and body size of the electric forklift in advance to ensure that it can pass through the narrow passage of the paper roll storage area stably. The driving speed of the electric forklift in the production workshop should be controlled within the specified limit, actively avoid passing staff and small material carts, and keep a safe distance from the ink storage area and printing equipment. The zero-emission feature of electric forklifts will not produce waste gas residue, which can prevent the surface of paper rolls from being polluted and avoid unexpected defects in the printing process.

Third, implement standardized daily maintenance and operation management. Before the shift, operators need to check the remaining power of the electric forklift, to avoid the situation that the equipment stops due to low power during the peak period of paper roll handling. The connection parts of the battery and the circuit system should be checked regularly, and high-pressure water is not allowed to directly wash the electronic components on the body during daily cleaning, so as to prevent short circuit failure. The staff should complete the special operation training, keep the acceleration, braking and lifting movements stable in the process of paper roll handling, and avoid the risk of paper roll slipping and collision caused by sudden operation. After the operation, the electric forklift should be parked in the designated charging area, and do not occupy the fire passage of the workshop. These practical measures can effectively reduce the unnecessary raw material loss in the handling link, and provide stable support for the smooth operation of the printing production line.