BYD P30JW-Ei walking electric forklift is a lithium-ion pallet truck with a rated load of 3000 kg, specially designed for medium and heavy-duty warehousing scenarios, suitable for high-frequency, short-distance, narrow-channel material transfer operations, taking into account load-bearing capacity, operation stability and operation and maintenance convenience.

Airframe design and pass performance

The vehicle is compact, with a total length of 1620 mm, excluding the forklift body length of 470 mm, and its own weight of 205 kg. The turning radius is 1410 mm, and the width of the right-angle stacking channel is suitable for 1000-1200 mm pallets. It is 2225 mm when placed across the fork, and 2097 mm when placed along the fork with 800-1200 mm pallets. It can work flexibly in small and medium-sized warehouses and narrow passages in workshops to improve the utilization rate of storage space. The size of the fork is 55/176/1150 mm (thickness/width/length), the outer width is 560/685 mm, and it is suitable for most standard pallets. The fork is reduced to 85 mm in height, which can be adapted to the needs of conventional ground operations.

Power and performance

Equipped with 48 V/48 Ah lithium battery, the battery weight is 20 kg, and it can be used at any time of charging, which is suitable for continuous operation needs. Equipped with 1.2 kW DC brushless drive motor and 0.8 kW DC brushed lift motor, the power output is stable. No-load driving speed is 5 km/h, full-load driving speed is 4.5 km/h; no-load lifting speed is 25 mm/s, full-load lifting speed is 18 mm/s, and the running rhythm is smooth. No-load climbing ability is 20%, full-load climbing ability is 8%, and it can be adapted to slight height difference roads such as warehouse gentle slopes and loading and unloading platforms.

Safe and practical configuration

Standard electromagnetic braking system, sensitive braking response, stable parking, effectively reducing the risk of slipping and sliding. The whole car adopts polyurethane tires, the size of the driving wheel is 210-70 mm, the size of the bearing wheel is 80-80 mm, and the size of the balance wheel is 80-30 mm. It is wear-resistant and non-slip. It is suitable for cement, epoxy floor and other surfaces. It is not easy to damage the ground during operation. The handle height can be adjusted in the range of 650-1335 mm, which is suitable for different operators' usage habits. The running noise of the whole machine is 70 dB (A), which helps to optimize the working environment of the workshop.

core product features

• Permanent magnet drive motor: low heat generation, low maintenance requirements, stable and reliable operation.
  

• Optimized fork design: suitable for double-sided pallets, easy for pallets to enter and exit;
  

• Safety hydraulic system: equipped with automatic hydraulic circuit pressure relief lifting limit, pressure relief response quickly;
  

• Automatic sleep function: It can protect the battery and prolong the battery life.
  

• Modular handle design: with bus structure, communication is convenient and reliable, key switches can be replaced independently, and maintenance is convenient.
  

• Lithium battery technology: using lattice series-parallel technology, with good dynamic performance;
  

• Self-lubricating bushing: The full rotating shaft is equipped with self-lubricating bushing, which is convenient to maintain and has a long service life.
  

This model is suitable for medium and heavy-duty material handling scenarios such as factory workshops, e-commerce warehouses, supermarket back warehouses, and light industrial manufacturing. It is a practical warehousing and handling equipment that takes into account both load-bearing capacity and operation efficiency.