Proper safety management of BYD electric forklifts is the core premise to ensure stable warehouse operation, reduce unnecessary operational risks and extend the service life of the equipment. All operators need to receive systematic professional training before taking up the post, and master all the following core safety essentials to avoid misoperation.

First of all, complete standardized pre-operation daily check before each use. Before starting the vehicle, operators need to walk around the equipment to check the appearance condition of the tires, confirm that there is no obvious crack or excessive wear affecting driving safety, then check the flexibility and braking effect of the brake system, test the lifting and tilting function of the fork mechanism to make sure there is no jamming or abnormal noise. It is also necessary to check the power display of the power battery, confirm that the peripheral wiring of the battery is in good condition without exposed wires or loose plugs, and check the normal working state of the lights, reversing prompt horn and other safety prompt devices. Any abnormal problem found during the inspection must be reported to the management personnel immediately, and the equipment is not allowed to be put into use before the hidden danger is eliminated.

Second, strictly abide by the on-site operation safety specifications during the working process. Operators shall not overload the forklift beyond the rated load, and place the goods on the pallet of the fork in the center to avoid the risk of goods slipping due to partial load. During the driving process, keep a safe distance with surrounding personnel, shelves and other equipment, reduce the driving speed in the corner, aisle crossing and other areas with poor vision, and honk the horn to prompt the surrounding people. When driving on a gentle slope, keep the goods facing the upward direction of the slope, do not turn on the slope, and do not use the forklift to carry personnel without professional supporting safety devices. When lifting the goods, do not allow any personnel to stand under the lifting framework to avoid the risk of falling goods.

Third, do a good job of post-operation safety management after the daily work is over. Park the forklift in the designated fixed parking area, do not occupy the passage entrance and exit or fire passage, fully lower the fork to the horizontal position close to the ground, tighten the hand brake, turn off the total power supply of the equipment, and do a good job of cleaning the surface of the vehicle. Regular professional maintenance shall be carried out according to the operation manual of the equipment, and personnel without professional qualification shall not disassemble the internal circuit and power components of the forklift without permission.

As a professional service provider focusing on BYD electric forklifts, Jian Shu New Energy can provide you with full range of operation guidance and supporting services for related equipment. If you have any demand for related consultation, please send an email to [email protected].