First, complete the surrounding work zone inspection before approaching the equipment. Before you get on the counterbalance forklift, you need to walk around the planned operation route first, confirm the ground condition is flat and free of obvious potholes, scattered sundries or slippery residues that may cause slipping. Check if the slope of the operation area is within the allowable range for normal driving, clear all irrelevant obstacles on the route, confirm there are no unrelated personnel staying in the operation range, and check that the stacked goods on both sides of the route are placed stably without the risk of toppling.
Second, finish the exterior and core component check of the counterbalance forklift. Do a full visual inspection around the vehicle first, check the tire wear condition and air pressure to make sure no abnormal damage or air leakage exists, inspect the fork arms for obvious deformation, crack or wear that exceeds the standard, confirm the lifting chain has proper tightness without abnormal stuck situation. Then check the status of lighting units, warning horn, brake system and steering mechanism, to make sure all these core safety components can respond normally. For electric counterbalance forklifts, you also need to check the battery power level, confirm the power connection interface is fastened properly, no leakage or abnormal overheating trace exists.
Third, complete the cab interior debugging and function test. Adjust the seat position to a proper state that you can operate all handles and pedals smoothly, fasten the safety seat belt correctly, then check the instrument panel to confirm all displayed parameters are within the normal range. Do a small amplitude test of the lifting and tilting function of the fork under no-load state, make sure all operating handles can reset flexibly without jamming.
.jpg)
Standardized preparation work can effectively reduce unexpected equipment failure risks, avoid unnecessary safety accidents, and extend the service life of the forklift. As Jianshu New Energy, we focus on providing professional services for BYD electric forklifts, if you have any related consultation demands, you can send email to us at [email protected].

