Many freezer warehouse operators often take material handling equipment as a secondary consideration in the early stage of site planning, which easily leads to redundant channel design, extra energy consumption and hidden operation risks in subsequent daily use. Taking electric forklifts as the core index to formulate the whole warehouse construction plan in advance can effectively avoid these problems, and bring more stable and low-cost operation effects for long-term cold storage service.
The first core part of the plan is the targeted layout adaptation. It is suggested to set up a special temperature-controlled transition zone adjacent to the deep freezing area, with the ambient temperature kept between 0℃ and 5℃. This zone can be used for temporary parking of electric forklifts between shifts, as well as exclusive charging area. Such design avoids placing the charging link in the low-temperature deep freezing area, which will not only reduce the extra power consumption of the forklift battery caused by long-term exposure to ultra-low temperature, but also prevent the heat generated during charging from increasing the cooling load of the freezer warehouse. When designing the access channel and cargo aisle, reasonably reserve the width according to the minimum turning radius of the selected electric forklift, instead of copying the channel standard for internal combustion forklifts, which can save about 8% to 12% of the effective storage space for the warehouse.

The second part is the standardized operation procedure formulation. According to the performance characteristics of electric forklifts in ultra-low temperature environments, set a reasonable shift cycle to ensure that the continuous working time of each forklift in the deep freezing area does not exceed 2 hours, and arrange a 15-minute rest in the temperature-controlled transition zone after continuous operation. Before the end of daily work, operators need to wipe off the frost and condensed water on the surface of the electric forklift in time, and park the equipment in the dry and ventilated transition zone, to prevent residual water from seeping into the circuit and affect the service life of the equipment.
.jpg)
The third part is the long-term operation efficiency optimization. Design the cargo access routing around the operation path of electric forklifts, place the fast-turnover SKUs on the storage shelves close to the outlet of the freezer warehouse, reduce the driving distance of forklifts in the ultra-low temperature area, and further reduce the power consumption loss. In addition, electric forklifts do not produce exhaust emissions during operation, which will not cause any pollution to the food, medicine and other high-cleanness goods stored in the freezer warehouse, fully meeting the strict operation standards of the cold chain industry.
Jianshu New Energy focuses on BYD electric forklifts, if you need a customized freezer warehouse planning solution that matches your own operation scale, you can send an email to [email protected] for professional consultation and support.
