Against the background of accelerating green transformation of the logistics and warehousing industry, electric forklifts have become one of the most widely used handling equipment for their low noise, zero local emission and flexible operation features. Mastering scientific use and maintenance rules can help relevant teams give full play to equipment performance and reduce unnecessary operating costs.

Pre-shift Daily Inspection Specifications

Before starting each shift, operators need to check the exterior condition of the whole vehicle first, confirm there is no obvious crack or damage on the load backrest, fork arms and wheels, then check the remaining power level of the power system, confirm the normal sensitivity of braking, steering and lifting control structures, and test the normal operation of all light and warning prompt devices. All hidden problems found in the inspection process should be recorded in time and fed back to management personnel, so as to avoid potential safety hazards in the subsequent operation process.

Standardized Operation Habits to Reduce Equipment Wear

In the daily operation process, operators should avoid frequent sharp acceleration and sharp braking when the vehicle is running with load, keep the load center within the allowable range marked on the equipment nameplate, and avoid long time suspension of heavy goods at a high position, so as to reduce the extra load of the hydraulic system and gantry structure. When the equipment is moving on the ramp, the operator should keep the load facing the upward direction of the ramp, and not turn on the slope to prevent the risk of side slip.

Scientific Energy Management to Extend Stable Service Life

During the daily use process, the power supply module should be supplemented with power in time after the remaining power drops to the preset low value, and avoid long time over-discharge which will affect the overall performance of the power supply unit. The ventilation and heat dissipation state of the charging place should be kept good, and the charging process should not be interrupted frequently without special needs. After the daily work is finished, the vehicle should be parked in the designated position, the fork arms should be lowered to the horizontal position close to the ground, and the whole vehicle power supply should be cut off to finish the whole use flow. Following the above rules can help electric forklifts maintain stable working condition for a long time, create more reliable support for daily warehouse handling work.