Proper regular maintenance of 3-wheel electric forklifts is core to stable daily operation of warehousing, logistics and manufacturing sites, which effectively cuts unexpected downtime and avoids unnecessary operation risks.

Daily Pre-Shift Visual and Functional Check
Before every formal operation, operators need to spend 5 to 10 minutes finishing basic inspection. First check the tire wear and air pressure status, make sure no obvious cracks or embedded sharp objects on the tread, confirm the three wheels can steer and roll flexibly without abnormal jamming. Then test the lifting function of the fork, check if the lifting and descending movement is smooth, confirm the parking brake and foot brake have reliable braking performance, also test all lighting and warning alarm devices to ensure they can work normally.
Battery System Routine Care
As the core power source of 3-wheel electric forklift, the battery needs targeted daily care. Operators should avoid over-discharging the battery to less than 20% of total capacity in daily use, complete timely charging after the power level drops to the standard threshold. Keep the surface of battery shell clean and dry, wipe away accumulated dust and spilled electrolyte regularly, check the connecting terminals to make sure no loose or corrosion phenomenon. Do not place flammable or metal objects on the top of battery shell to avoid short circuit risk.
Wearing Parts and Lubrication Management

Check the wear degree of fork pin, chain, steering connection parts every week, timely add specified lubricating oil to each rotation and friction point according to the operation manual requirement, to reduce abnormal wear of metal parts under long time high load operation. Check the hydraulic oil level of lifting system regularly, replenish or replace the hydraulic oil according to the specified cycle, to avoid poor lifting performance caused by insufficient or deteriorated hydraulic oil.
Electrical Component Protection
Keep the inner electrical control box, wiring harness interface away from long term moisture, dust accumulation or direct flushing with high pressure water gun, regularly check if the wiring harness sheath has breakage or exposed copper wire, timely handle the hidden danger in early stage.
We are Jian Shu New Energy, focusing on BYD electric forklift products and supporting professional maintenance services. For more targeted operation and maintenance consultation, you can contact us via [email protected].
