Reach forklifts are widely applied in narrow-aisle warehouse scenarios for high-position goods storage and retrieval, and complete and standardized pre-operation preparation is the core premise to guarantee operation safety and improve work efficiency. Without proper preparation, operators may face hidden risks like sudden vehicle failure, accidental collision or unstable cargo falling during operation, which will disturb the normal operation order of the whole warehouse.
The first step of preparation is to confirm the qualification and status of the operator. Only personnel who have completed formal professional operation training and mastered the basic operation logic of reach forklifts can carry out relevant work. Before starting the vehicle, operators need to adjust the seat position to fit their own height and habits, fasten the safety belt tightly, and adjust the surrounding rearview mirrors to ensure they can clearly observe the operation status of all directions around the vehicle. Operators should not operate the reach forklift when they are in poor mental status, under the influence of alcohol or drugs that may cause delayed response.
.jpg)
The second step is to finish the full range of pre-operation check of the reach forklift. Operators need to walk around the vehicle first to check if there is obvious damage or deformation on the vehicle body, forks and guard frame, confirm that the tire pressure is within the normal range, and no sharp foreign matters are embedded in the tire surface. Then check the hydraulic system for oil leakage, test the braking system, steering system and lifting function to confirm all parts work smoothly. For electric reach forklifts, operators need to check the remaining battery level to make sure the power is enough to support all scheduled tasks in this shift, to avoid sudden power off that traps the vehicle in the middle of the narrow aisle.
The third step is to inspect the operation environment and confirm the work plan in advance. Operators need to clear up scattered sundries, accumulated goods, water stain and oil stain on the driving aisle in advance, confirm that there are no irrelevant personnel staying in the operation area, and the load capacity of the target shelf matches the weight of the goods to be lifted. Before starting operation, operators should also confirm the weight, size and placement position of the to-be-handled goods, plan a smooth driving route to avoid frequent temporary steering in narrow aisles, and confirm the maximum lifting height will not touch the obstacles above the shelf.
.jpg)
Standardized pre-operation preparation can effectively reduce operation risks, extend the service life of the forklift, and improve the overall operation efficiency of the warehouse. Jian Shu New Energy is a professional provider focusing on BYD electric forklifts, if you have any demands for electric forklift selection, operation training or daily maintenance consultation, please send emails to [email protected] for professional support.
