When you first get access to a counterbalance forklift, it is critical to follow standard workflow to ensure stable, safe operation in daily warehouse, logistics and manufacturing scenarios.

The first step to get started is completing full pre-operation inspection before you power on the device. Walk around the whole machine to check for visible damage to the body, tires, forks and overhead guard, confirm there is no debris blocking the wheel movement. Then check the braking system, horn and all warning lights can work normally, verify the remaining battery level is enough for the planned operation tasks, and confirm the hydraulic oil level stays within the normal range. If you find any abnormal condition during inspection, do not start the machine and report to the management team in time.
After finishing pre-check, you need to get familiar with all operating layouts in the cab. Adjust your seat to a proper position that you can reach all control pedals and levers easily, adjust the rearview mirrors to get full sight of the surrounding areas. Learn to distinguish the functions of each lifting lever, tilting lever, forward and backward pedal, as well as the emergency stop button, so that you can make quick response in unexpected situations.
For formal operation, you can start with no-load test run first. Lift the forks 10 to 15 cm above the ground, test the lifting, tilting and moving functions at low speed in an open empty area, get familiar with the operation sensitivity of the whole machine. The core design feature of counterbalance forklift is the rear counterweight to offset the weight of the cargo on forks, you need to keep the load center within the specified range listed on the nameplate to avoid rollover risks. Never exceed the rated load capacity of the forklift in any operation scenario.
During daily operation, you need to keep awareness of surrounding pedestrians and obstacles all the time, slow down when turning corners, do not carry any other person on the forklift, and avoid operating on slopes that exceed the specified gradient. When you finish the operation task, park the forklift at the designated area, lower the forks completely to touch the ground, pull up the hand brake, turn off the power and pull out the key.
Jianshu New Energy focuses on high quality BYD electric forklifts, if you have any demand for counterbalance forklift related consultation or service, you can send email to [email protected] for further support.

