3-wheel electric forklift is widely applied in scenarios with limited operating space such as narrow aisle warehouses, retail storage areas and small manufacturing workshops, thanks to its compact body, flexible steering and zero-emission operation features. As a professional new energy forklift service provider, Jian Shu New Energy focuses on BYD electric forklifts, and we share this practical entry guide to help new operators get familiar with the equipment correctly and establish standardized operation habits.
The first core step before any formal operation is to complete the full pre-operation inspection. You need to walk around the whole equipment first, check the tire wear condition to make sure there is no obvious crack or foreign matter embedded in the tread, confirm the fork body has no deformation, crack or loose fixing parts. Then check the power display panel to confirm the remaining power is sufficient for the planned operation tasks, test the braking function, light indicator and horn to make sure all components respond normally, and clear the obstacles and irrelevant personnel within 1 meter around the operating area to avoid potential safety risks.
When you get on the vehicle for formal operation, first adjust the seat position and rearview mirror angle to ensure you can clearly observe the operation status of the fork and the surrounding road condition, fasten the safety belt correctly before you start the equipment. Lift the fork to about 10 to 15 cm above the ground before starting, drive at low speed in the first 50 meters to get familiar with the steering sensitivity of the 3-wheel electric forklift, do not turn sharply at high speed, and strictly control the load weight within the rated load range marked on the equipment nameplate. When operating in narrow aisles, keep a safe distance of more than 20cm from the goods and the shelf to avoid accidental collision.

For daily use, you need to park the forklift in the designated storage area after finishing all operation tasks every time, pull the handbrake firmly, lower the fork completely to contact the ground, and turn off the power supply. It is recommended to charge the equipment in time when the remaining power drops to 20% to 30%, avoid long-term under-power storage which will affect the service life of the power system. You can wipe the dust and sundries on the body and fork regularly, check whether the electrical connection ports are loose on a regular basis to keep the equipment in good operating condition.
If you have any demand for professional 3-wheel electric forklift related products and technical support, Jian Shu New Energy who focuses on BYD electric forklifts can provide you with proper solutions, you can contact us via [email protected] for more details.
.jpg)
