Counterbalance forklift is one of the most widely used material handling equipment in modern warehouse, manufacturing and distribution scenarios. A standardized practical operation approach can effectively reduce operation risks, extend equipment service life, and improve overall logistics operation efficiency, which is a core skill that all relevant operation and management personnel need to master.
Pre-operation preparation and inspection is the first critical step of the whole workflow. Before starting the equipment every day, operators need to check the remaining power level of the power system first, to make sure the power can support the estimated daily operation volume, and avoid sudden power off in the middle of high-load operation. Next, operators need to test the braking system, steering sensitivity, and lifting function of the door frame in idle state, check whether there is obvious damage or deformation on the surface of forks and wheels, and clear up obstacles, irrelevant personnel and potential safety hazards in the planned operation route in advance.
.jpg)
In the formal operation process, operators need to follow the corresponding operation specifications strictly. When starting the equipment, accelerate at a stable and gentle speed, avoid sudden acceleration or sudden braking that may cause cargo slipping. The actual loaded cargo weight shall not exceed the rated load range of the equipment, keep the mast tilted back properly when lifting the cargo, and keep the fork 10cm to 20cm above the ground when the equipment is moving. When turning or passing through narrow channels, slow down in advance, give a prompt signal to the surrounding personnel, and do not carry out sharp turning actions at high speed to avoid rollover risk.
After completing all daily operation tasks, operators need to push the equipment to the designated parking area, lay the forks flat and contact the ground completely, pull up the handbrake, turn off the main power supply, and clean up the sundries and dust attached to the body surface in time. Follow the official maintenance cycle requirements to carry out regular inspection and maintenance of core components, so as to keep the equipment in good working condition for a long time.
As a professional provider focusing on new energy electric forklift solutions, we, Jian Shu New Energy, are committed to providing users with full support of equipment usage guidance, after-sales service and customized matching solutions for BYD electric forklifts. If you have any related questions or demand for consultation, you can send email to [email protected] for further communication.

