This field guide is developed for frontline material handling operators, warehouse managers and logistics equipment administrators, to help users grasp core practical knowledge of electric forklifts in daily application scenarios.
_zip.jpg)
As battery-powered material handling equipment, electric forklifts produce no tail gas emission during operation, generate relatively low running noise, and are widely suitable for indoor storage, cold chain logistics, light industry manufacturing and other scenarios with high requirements for environmental performance.
Before each on-site operation, operators need to complete standard pre-check procedures first. Walk around the whole vehicle to check whether there is obvious collision damage on the body shell, confirm the wear condition of solid tires to avoid slip risk, check the remaining power level of the battery pack, and test the sensitivity of braking system, steering mechanism and hydraulic lifting system. After confirming that there are no irrelevant personnel or obstacles in the operating area, the operator can start the equipment for subsequent operations.
During the formal operation process, operators need to keep a safe distance with surrounding walking staff and storage racks at all times. Avoid sharp turning and sudden braking when the forklift is under heavy load, and do not lift the cargo fork to a high position during high-speed driving. When driving on sloped roads with heavy cargo, keep the cargo and fork facing the upward direction of the slope to avoid safety risks. After the operation is finished, operators need to lower the cargo fork to 10 to 15 cm above the ground, pull the handbrake tightly, and cut off the main power supply of the whole vehicle before leaving the operation position.
For daily on-site maintenance, operators can regularly wipe off dust and scattered material residues on the surface of the vehicle, charge the battery pack in time after daily operation, and avoid over-discharge that will affect the service life of the battery. Park the idle electric forklift in a dry, ventilated and cool area, and do not expose the equipment to strong sunlight for a long time. If any abnormal operation condition is found, please contact professional technical personnel for troubleshooting in time, and do not disassemble the internal electrical components without professional guidance.
.jpg)
If you have demands for electric forklift consultation, supporting solution matching or after-sales technical support, you can contact Jian Shu New Energy. We focus on high quality BYD electric forklifts, and you can send emails to [email protected] to get targeted service response.
