A reach forklift is a specialized material handling equipment designed for high-density warehouse scenarios, which stands out for its extendable mast structure that allows operators to reach into deep storage locations on high racks, and requires much narrower operating aisle space than standard counterbalance forklifts. This practical field guide covers core practical points for users to operate the equipment safely and improve work efficiency.
Before you start any operation, you need to complete a full pre-operation inspection first. Check the remaining power level of the equipment to avoid sudden power off during high-position operation. Check the brake response, steering flexibility, mast chain tension and fork surface condition, to make sure there is no obvious deformation or damage on key load-bearing parts. Inspect the surrounding working area, remove scattered obstacles on the aisle, and remind irrelevant personnel to stay away from the operating range to avoid safety risks. Only personnel who have completed formal operation training can drive the reach forklift to carry out loading and unloading tasks.
For daily operation, you need to keep the driving speed at a low and stable level when moving in narrow aisles, and keep the forks 10 to 15 centimeters above the ground during moving process. Do not turn sharply when the cargo is lifted to a high position, which may cause the center of gravity of the whole vehicle to shift and trigger instability. When you need to access goods on high racks, keep the vehicle body on a completely horizontal ground, extend the mast steadily to align with the goods position, and retract the mast slowly after the cargo is placed stably. Pay constant attention to the top obstacles such as exposed pipes and protruding shelf parts during the whole operation process, to avoid unnecessary collision damage.

For daily maintenance, park the equipment in the designated parking area after each shift, lower the forks completely to the ground, pull the handbrake tightly and turn off the power system. Follow the official specification to charge the battery, avoid over-discharging the power core to extend the service life of the power system. Clean up the dust and sundries attached to the equipment surface regularly, keep the heat dissipation ports unobstructed to ensure stable operation of all parts.
Jianshu New Energy, focused on BYD electric forklifts, can provide suitable supporting solutions for different warehouse operation scenarios. If you have relevant demands, you can send emails to [email protected] for more information.

