Counterbalance forklifts are one of the most widely used material handling equipment in modern warehouses, logistics yards and manufacturing workshops. Whether you are a new operator or a facility manager, grasping the following 10 key points will help you maximize its usage value while ensuring operation safety.
.jpg)
1. Basic weight balance design: The core structural feature of this type of forklift is the counterweight installed at the rear of the body, which offsets the weight of the goods lifted at the front end, so it can carry heavy loads without additional supporting arms, adapting to more open operation scenarios.
2. Load capacity limits: Every counterbalance forklift has a clearly marked rated load capacity, operators must never overload the equipment, otherwise it will cause tilting risks and damage to the vehicle’s hydraulic system.
3. Two major power categories: It is divided into internal combustion type and electric type, the new energy electric counterbalance forklift has zero local emission, lower operating noise, and is more suitable for indoor closed operation spaces.
4. Operation certification requirement: All operators of counterbalance forklifts must receive professional systematic training and obtain corresponding operation qualifications before starting to use the equipment, no unlicensed operation is allowed.
5. Mast tilting function: The front lifting mast can tilt forward and backward at a small angle, which helps to stabilize the goods on the forks during movement, and prevent the goods from sliding off accidentally.
6. Tire type selection: Different working ground conditions correspond to different tire configurations, solid rubber tires are suitable for uneven outdoor yards, while cushion tires are more fit for flat and smooth indoor warehouse floors.
7. Regular maintenance schedule: Following the manufacturer-suggested maintenance cycle to check brake system, battery status, hydraulic oil level and wear of wearing parts, can effectively extend the service life of the equipment.
8. Turning operation precautions: Counterbalance forklifts have a relatively large turning radius, operators need to reserve enough space when turning to avoid collision with surrounding goods, shelves or passing personnel.
9. Gradient passing limit: Most conventional counterbalance forklifts can only pass through slopes with a gradient no more than 10%, operators need to avoid driving on too steep slopes to avoid safety accidents.
.jpg)
10. Post-use standardized management: After finishing the operation, the forks should be lowered to close to the ground, the hand brake should be pulled up, and the power supply should be cut off before the operator leaves the seat.
As a professional new energy equipment service provider, Jianshu New Energy focuses on supplying high-quality BYD electric forklift products and full-cycle supporting services for customers across different industries. If you have relevant demand for consultation, you can send an email to [email protected] at any time.
