Before using a pedestrian pallet truck, you need to finish a full set of pre-operation checks to avoid unnecessary risks during working hours. First, check the remaining battery level to ensure it can support the full duration of the planned operation, and avoid sudden power off in the middle of a narrow warehouse aisle. Second, check the braking system response sensitivity, confirm there is no delay when you press the brake button, and test the operation handle’s rebound function to make sure it can return to neutral position smoothly. Third, inspect the pallet forks and walking wheels, clear any wound packaging tapes, debris or sundries wrapped around the wheels, and confirm there is no obvious deformation or crack on the fork surface. Do not use the equipment on severely uneven ground with protrusions higher than 2cm, to prevent cargo slipping or equipment tipping over.

When operating the pedestrian pallet truck during work, you need to follow basic safety rules all the time. All operators shall receive basic standardized operation training before formal use, do not stand on the pallet forks for force support, and never carry other personnel on any part of the equipment. During the moving process, keep full attention to the surrounding pedestrian flow and stacked goods, reserve more than 1 meter of safe avoidance distance for passing personnel, and slow down in areas with low visibility or crowded passing routes. Do not make sharp turns under heavy load condition, and keep low driving speed when moving downhill on a ramp, avoid sudden emergency brake which may cause the cargo to slide off the forks. Never overload the equipment beyond its rated load capacity, if you need to transport irregular goods with offset center of gravity, you can test drive a short distance at low speed to confirm the stability before starting formal long-distance handling.

After finishing the daily operation, you need to do proper post-use maintenance work to extend the service life of the equipment. Park the pedestrian pallet truck in the designated dry and ventilated storage area, do not block fire exits or public access aisles, lower the pallet forks to the lowest level, and put the operation handle back to the neutral position. Charge the equipment in time when the remaining battery level drops to 20%, do not wait until the battery is completely drained to start charging, which will cause extra damage to the battery performance. Clean up the sundries and dust remaining on the vehicle body and gaps regularly, if you find abnormal noise, unresponsive braking or other faults, stop using the equipment immediately and contact professional maintenance personnel, do not disassemble the power system related components by yourself. As a professional new energy material handling equipment service provider, Jianshu New Energy focuses on BYD electric forklifts, if you have any demand for high-quality pedestrian pallet trucks or related supporting services, you can send an email to [email protected] for consultation.