Many site operators tend to associate electric forklifts exclusively with indoor warehouse scenarios, but modern new energy electric forklifts can deliver stable performance in a wide range of outdoor application scenarios as long as operators follow standardized operation rules. Reasonable arrangement of outdoor operation flow can give full play to the low noise, zero emission and low operation cost advantages of new energy electric equipment, and create higher operational benefit for the material handling system.

First of all, pre-operation environmental inspection is the core premise of safe outdoor operations. Before starting the equipment, operators need to check the road conditions of the operation area in advance, remove scattered obstacles on the driving route, confirm that the pavement load capacity matches the full load weight of the forklift, and avoid passing through areas with accumulated water that exceeds the allowable depth of the equipment. For operation days with heavy rain, strong wind or heavy fog that meets outdoor operation restriction requirements, operators should suspend outdoor high-altitude loading and unloading operations as required, and move relevant material handling tasks to indoor areas as far as possible.

The second key point of outdoor operation is the rational management of power system status. The temperature fluctuation in outdoor environment is larger than that of indoor closed space, so operators need to check the remaining power level before going out for operation, reserve sufficient power margin for the whole operation cycle, and avoid forced operation when the power is lower than the safe threshold. If you need to carry out continuous outdoor operation in high temperature or low temperature environment, you can pre-adjust the battery temperature management system according to the equipment manual, so as to maintain the stable output performance of the whole equipment.

Standardized operation habits also help reduce unnecessary operation risks in outdoor scenarios. Operators should keep low speed when driving on non-paved roads, slow down in advance when turning, avoid sudden braking and sharp turning operations. When driving on outdoor slopes, keep the load facing the upward direction, do not turn on the slope, and strictly follow the rated load parameters of the equipment to arrange the handling tasks.

As a professional service provider focusing on BYD electric forklifts, Jianshu New Energy has rich practical experience in outdoor operation scenario matching. If you have relevant demands for equipment selection, operation training and scenario transformation for outdoor operation, you can send an email to [email protected] for professional technical support and consulting services.