When modern logistics warehouses pursue higher storage density to cut operation cost, double deep reach truck has become one of the most popular handling equipment options, as it can access two layers of pallet goods placed in the same aisle direction, effectively expanding the total storage capacity without expanding the warehouse floor area. There are several key factors that operators and warehouse managers need to take full consideration of before introducing and using this type of equipment.

The first core point is site layout adaptability verification. Before selecting the equipment, you need to accurately measure the actual aisle width reserved for double deep operation, the total depth of the double-layer shelf unit, the standard size of the commonly used pallets, and the maximum required lifting height for daily operations. You also need to check the flatness and slope of the warehouse ground, to make sure all site conditions match the allowable parameters of the equipment, so as to avoid position deviation when picking and placing goods on the inner layer of the shelf, or potential safety hazards during high-lifting operation.

The second important factor is load performance matching. It is necessary to clarify the maximum weight of daily handled goods, and confirm the residual load capacity of the equipment under different lifting height conditions. The load capacity at the maximum lifting height is usually lower than the rated load at low position, you need to make sure the heaviest regular goods will not exceed the allowable load under corresponding working height, to guarantee the operation stability.

As for power system selection, new energy power solutions can support long hour continuous operation for multi-shift warehouse scenarios, which can reduce the frequency of charging or battery replacement, and cut long-term energy consumption cost. Our team, Jian Shu New Energy, focuses on BYD electric forklift products, we can provide proper double deep reach truck related solutions matching different operation requirements. For any further inquiry, you can send email to [email protected].

Last but not least, standardized operation training and regular maintenance are also essential. Double deep operation requires more precise positioning operation compared with ordinary reach truck, all operators need to receive systematic professional training to get familiar with the alignment logic for different depth shelves. Regular inspection on wearing parts such as mast chains and load wheels can effectively extend the service life of the equipment and reduce unexpected downtime. Full consideration of all above points can help you give full play to the advantages of double deep reach truck, bring stable and efficient operation experience for your high-density warehouse.