The BYD5 electric forklift is widely applied in scenarios like warehousing logistics, factory material handling, port cargo transfer and other daily industrial operation scenes. Proper mastering of relevant use notes can effectively reduce operation risk, extend the service life of equipment and bring better using experience for operators. Below we sort out systematic practical notes for reference of all relevant users.

Pre-operation check notes. Before starting the equipment every shift, operators need to finish necessary check work first. First, check the remaining power display of the whole machine to ensure the power can support the whole shift's operation, avoid sudden power off in the middle of operation that may cause hidden safety risks. Second, check the flexibility and reliability of the braking system, steering system and lifting mechanism, confirm there is no abnormal stuck or unresponsive situation. Third, check the surface condition of the fork body, confirm there is no obvious crack or deformation that may affect the bearing performance. At last, inspect the surrounding operation environment, clear up obstacles in the driving route, and confirm no irrelevant personnel stay in the operation range.

Daily operation specifications. During the driving process, operators need to keep full attention, keep proper safety distance with surrounding personnel and other equipment, avoid sharp steering and sudden braking at high speed. When passing narrow passages or turning corners, operators should slow down and honk to remind surrounding personnel to avoid collision. When working on sloped roads, keep the load facing the uphill direction, avoid turning on the slope to prevent sideslip. When lifting and putting down goods, adjust the back inclination angle of the gantry properly to keep the goods stable, and no personnel is allowed to stand under the lifting gantry to avoid falling accident. Operators should strictly refer to the rated load parameter of the equipment to arrange handling work, do not carry over-weighted goods for a long time.

Routine maintenance tips. For daily charging work, operators need to finish the operation in the specified ventilated and dry charging area, do not use non-matching charging equipment to avoid damage to the battery system. After finishing daily operation, operators can wipe the dust and sundries on the surface of the equipment, clean the heat dissipation grille regularly to keep good heat dissipation performance of the whole machine. Check the liquid level of hydraulic oil regularly according to the operation frequency, replenish corresponding specification of hydraulic oil in time when the liquid level is lower than the standard range. If the equipment needs to be parked for a long time, keep the battery power in a reasonable interval, disconnect the main power switch of the whole machine, and park the equipment in the designated dry and cool area. If you need more professional support and related service, you can contact us via email at [email protected]. We are Jian Shu New Energy, focusing on BYD electric forklift related services for a long time.