First, pre-operation inspection specifications are the core premise of safe and stable operation. Before each shift, operators need to carry out full appearance and function check for the lead acid electric forklift, including confirming the flexibility of braking and steering system, checking whether there is obvious damage to the tire and fork structure, verifying the remaining power of lead acid battery, and confirming no electrolyte leakage or abnormal shell deformation on the battery pack. Operators are strictly forbidden to drive the forklift with hidden faults to enter the operation area.

Second, standard use of lead acid battery directly affects the service life of the whole equipment. Operators shall carry out charging work in the specially designated ventilated charging area, far away from open fire and high temperature heat source. It is not allowed to open the battery cover at will during charging process, to avoid accidental contact with high temperature gas generated during charging. In daily operation, operators should avoid using the forklift until the power is completely exhausted, and supplement power in time when the remaining power is lower than 20% to avoid deep discharge damage to the battery plate. When adding water to the battery in daily maintenance, only distilled water that meets industrial standards can be used, and tap water containing impurities is not allowed to be added to prevent internal corrosion of the battery.

Third, in-process operation specifications ensure the safety of personnel, goods and facilities. Before starting operation, operators need to confirm that there are no obstacles or irrelevant personnel in the driving channel, and keep a safe distance from surrounding people during driving. The total weight of loaded goods shall not exceed the rated load of the forklift, and operators are not allowed to stand under the lifting fork to avoid falling injury caused by unstable goods. When passing through narrow passages or turning, operators should slow down in advance and honk a warning, avoid sharp turning on sloped roads, and do not drive with goods at too high position to prevent toppling.

After each operation, operators should park the forklift in the designated fixed area, pull the hand brake, lower the fork to the lowest position, and turn off the whole power supply. Operators can regularly wipe the dust and residual trace electrolyte on the surface of the battery pack to keep the battery surface dry and clean, so as to avoid accelerated self-discharge caused by accumulated sundries.

We are Jianshu New Energy, focusing on BYD electric forklifts. If you need relevant technical support and consultation, please contact us via [email protected].