First, you need to finish the working environment verification before using your BYD lithium forklift, no matter for the first time commissioning or daily pre-operation check. Clear all scattered sundries, sharp obstacles and accumulated water on the planned driving and operation routes, confirm that the ground bearing capacity meets the rated load demand of the forklift, and the passing height of the passages will not interfere with the lifting movement of the fork. You can also mark the no-operation zone around the working area to avoid irrelevant personnel entering the operation range by accident.

Next, complete the vehicle appearance and basic component inspection. Check the tire pressure to keep it within the designated standard range, confirm there is no obvious crack or excessive abrasion on the tire surface, check the body shell, hydraulic oil pipeline and fork structure, make sure there is no oil leakage, structural crack or loose connection of all parts. You can also wipe the dust on the operation panel and the surface of the car body to keep the operation area clean and easy to observe the data display.

Then focus on the inspection of the lithium battery system. Confirm the remaining power level can support the whole day's operation demand, wipe the dust and sundries on the surface of the battery and the heat dissipation holes, check the tightness of the charging interface, and make sure there is no liquid or conductive foreign matter accumulated around the interface. You can also confirm that the battery locking structure is fully fastened to avoid displacement in the driving process.

After that, conduct a no-load test before formal operation. Start the vehicle at a low speed, test the flexibility of the steering system, the sensitivity of the brake system, the smoothness of the lifting and tilting action of the fork, confirm that all the instrument indicators on the operation panel display normally, no abnormal alarm code pops up. Adjust the position and angle of the operation seat and rearview mirror to adapt to the operation habit of the operator.

Finally, confirm that the operator has received standardized operation training, wears necessary anti-skid work shoes and safety protective equipment, and is familiar with the operation specification and emergency response process of the lithium forklift. As a professional service provider focusing on BYD electric forklift, Jian Shu New Energy has rich practical experience in pre-operation guidance, routine maintenance and supporting after-sales services. If you have any relevant demand for operation guidance and equipment supporting services, you can send email to [email protected] for further consultation and get targeted professional support.