Switching to new energy electric forklift products brings smoother operation experience, lower daily operating cost and more eco-friendly working performance for scenarios including warehouse storage, logistics distribution and manufacturing workshop handling. As a professional service provider focusing on BYD electric forklift solutions, Jianshu New Energy is dedicated to helping all new users master standard and correct operation rules of the device, if you have any relevant consultation demand in the using process, you can contact our professional team via [email protected] anytime.

The first step of getting started with your BYD electric forklift is completing a full set of pre-operation checks before startup. Before you power on the whole device, you need to first check the overall appearance of the vehicle body, confirm there is no obvious damage on the tire, cargo fork and top protection frame, and no hard foreign matters stuck in the rotating or moving parts. Next you can check the connection status of the power battery, confirm the battery fixing lock is fully fastened, and the power display screen shows sufficient remaining power to support the planned handling tasks of the whole day. At last, you need to inspect the surrounding working area, clear the scattered sundries on the planned driving route, and mark the no-operation zone near the edge of high shelves and steep slope sections to avoid unnecessary accidental risks.

After you confirm all pre-inspection items meet the safety requirements, you can enter the standard startup and basic operation stage. Sit firmly in the fixed operation position, fasten the safety belt tightly first, then insert the vehicle key and turn it to the power-on gear, wait for 2 to 3 seconds until the whole vehicle system finishes self-check process and no abnormal fault code is displayed on the central dashboard. Next you can slightly push the acceleration handle to test the forward and reverse moving function, and then operate the independent lifting control lever to confirm the cargo fork’s lifting and lowering function runs smoothly. For first-time users, we suggest you carry out no-load operation practice in an open and empty area for 10 to 15 minutes, get fully familiar with the operation sensitivity of each control lever, and master the actual turning radius and braking distance of the vehicle before you officially enter the working scene to carry goods.

For long-term stable operation of the BYD electric forklift, you also need to master basic daily use notes. In daily operation, please do not make the forklift work beyond its rated load range, and do not drive the vehicle on the slope with inclination exceeding the specified limit. After you finish all operation work of the day, park the forklift at the designated parking position, lower the cargo fork to the position close to the ground, turn off the power key, and pull up the hand brake stably. It is also recommended to arrange regular routine maintenance inspection according to the official operation manual, to keep the vehicle in good operation status for a long service cycle. If you encounter any operation confusion or supporting service demand in the using process, you can contact our team at [email protected] to get targeted professional support.