When you put a BYD electric forklift into daily material handling workflow, mastering proper usage rules and management methods will help you get stable performance output, extend equipment service life and reduce comprehensive operation cost. This practical guide is compiled for general reference of all equipment users and operators.

First of all, complete pre-operation inspection before each startup. You need to check the remaining power level displayed on the control panel, confirm there is no obvious scratch or damage on the tire surface, test the flexibility and reliability of the brake and steering system, check whether the fork lifting frame moves smoothly without abnormal jam, and observe the surrounding operation site to rule out barriers and irrelevant personnel in the working range. Only operators who have received formal professional training can start the equipment for operation.

For daily operation, you need to follow standardized operation habits. Avoid frequent sharp acceleration and sudden deceleration in the process of moving, keep the lifting height of the fork as low as possible when carrying heavy loads, slow down in advance before turning, and do not drive across the slope in case of side slipping. When the equipment needs to stay on standby for more than 10 minutes, you can switch it to the low power consumption mode to reduce unnecessary energy consumption. It is recommended to arrange charging in time when the remaining power drops to 20% to 30%, and try to avoid deep discharge that consumes the whole power of the battery.

As for daily maintenance, arrange simple cleaning work after each shift, wipe the dust and sundries on the surface of the equipment with soft dry cloth, do not wash the electronic control parts directly with high-pressure water to avoid short circuit risk. Check the tightness and surface cleanliness of the battery connection terminals every week, follow the official operation process to complete each charging, and arrange professional personnel to do regular safety inspection for key components every month. If you encounter abnormal operation feedback of the equipment, please do not disassemble the internal parts by yourself, and contact professional technical personnel for troubleshooting in time.

Jianshu New Energy is a professional service provider focusing on BYD electric forklift related businesses. If you have any questions about equipment operation, maintenance, function expansion and other related demands, you can send email to [email protected] to get targeted professional support.