Regular standardized inspection is the core premise to keep electric pallet jacks in stable working condition, avoid unnecessary safety accidents and extend the whole service cycle of equipment. Many warehouse operators tend to ignore the standardized inspection steps, which often leads to hidden faults that break out suddenly in the peak of operation, causing unnecessary economic loss and even personnel injury.

To make the inspection process easy to follow, the checklist can be divided into three logical stages for implementation. The first stage is the pre-use check before operators start daily operation. Operators need to walk around the whole equipment to check the appearance integrity first, confirm there is no obvious crack, deformation or scratch on the fork legs, frame and operation handle, then check the tire condition to make sure there is no serious wear, embedded foreign object or air leakage. Next, operators need to test the lifting and descending function of the fork, check the effectiveness of the brake system, and confirm the remaining power of the battery is sufficient to support the planned operation tasks of the day. All abnormal situations found in pre-use check need to be recorded and reported in time, instead of forcing the equipment to run.

The second stage is the patrol inspection in the operation process. Operators need to pay attention to the operation sound of the driving motor and the hydraulic pump at any time, confirm there is no abnormal noise, stuttering or lag response during steering, moving and fork lifting process. If the equipment shows any abnormal performance, operators need to stop the machine at the safe area for further check immediately.

The third stage is the post-shutdown inspection after daily operation. Operators need to park the equipment at the designated position, lower the fork to the lowest position, cut off the power supply, clean the surface dust and sundries stuck on the equipment, and charge the equipment as required.

We are Jianshu New Energy, focusing on high-quality BYD electric forklift products and supporting operation and maintenance guidance. If you need more professional guidance on electric industrial equipment inspection, you can contact us via [email protected] for further communication.