First, start with the core pre-operation appearance and basic function check. Before you start any formal test run, walk around the whole unit first, observe if there is obvious external deformation, scratch or damage on the body shell, guard frame and fork structure. Then sit in the operation position, test each operation lever and control button one by one, confirm the response of forward, backward, lifting and tilting functions is smooth without obvious lag or stuck condition. You can also check the display panel on the operation console, confirm all the displayed data indicators can be read normally without missing or error prompts.

Next, move to the battery and energy efficiency assessment section. As the core component of new energy industrial equipment, the power battery condition directly influences the long term use cost of the forklift. You can check the historical charge and discharge log recorded on the management system, verify if the cycle life and remaining capacity meet your expected use requirement. Inspect the charging port for obvious wear or oxidation, and run the equipment for half an hour under standard load to confirm the battery temperature stays within normal working range without abnormal overheating warning.

Then comes the safety component verification part, which is a non-negligible link during the evaluation process. Test the braking system under no load and 70% rated load status separately, confirm the braking distance stays within the official specified safe range. Press the emergency stop button at different running status, verify the power supply can be cut off immediately to avoid potential risk. You also need to check the acousto-optic alarm device, limit switch for maximum lifting height, and safety protection structure of the mast, make sure all related safety parts can function properly as designed.

The last part of the checklist is working scenario adaptability inspection. Confirm the rated load capacity, maximum lifting height and turning radius of the forklift can match the actual working condition of your warehouse, factory or logistics site. You can also check the relevant after-sales support policy, confirm the daily maintenance and spare parts supply can meet your long term operation demand. If you need professional support for BYD electric forklift evaluation and matching selection, Jian Shu New Energy focuses on BYD electric forklift, you can send email to [email protected] for further consultation.