For cold storage facility managers, selecting and using suitable material handling equipment directly affects operational efficiency, personnel safety and equipment service life. Unlike normal temperature warehouses, cold storage environments usually maintain temperatures between -25℃ to 0℃, and some ultra-low temperature scenarios even go below -30℃, which puts higher demands on the performance of electric forklifts.
First, you need to confirm the low-temperature adaptability of the core components of the electric forklift. The battery, motor, controller and hydraulic system are the core parts that are most likely to be affected by low temperature. Ordinary electric forklifts may experience reduced battery discharge efficiency, slowed response of hydraulic parts and condensed water on circuit boards when working continuously in low temperature environments, which will increase equipment failure rate. It is recommended to choose electric forklifts that have passed long-term low temperature adaptation test, with specially configured low-temperature resistant battery thermal management system, sealed electric control components and anti-freeze hydraulic oil, to ensure stable operation even in long-term cold storage scenarios.
Next, establish a targeted daily operation and maintenance specification for electric forklifts used in cold storage. After each shift of operation, do not park the electric forklift directly in the low temperature storage area for a long time. It is recommended to drive it to the pre-prepared normal temperature transition buffer zone to idle for 10 to 15 minutes, so that the condensed water formed on the surface of each component can be fully evaporated, to avoid component damage caused by ice formation after long-term shutdown. Regularly check the battery power consumption status, the sealing performance of the electrical interface, and the wear of the anti-slip parts of the forklift, timely replace the aging sealing parts, to avoid potential safety hazards in operation.
.jpg)
You also need to train the forklift operators to master the operation specifications adapted to the cold storage scenario. The low temperature environment will make the road surface easy to form a thin ice layer, which will reduce the friction coefficient of the driving wheel. The operator should avoid sharp steering and sharp braking during the driving process, control the driving speed within the safe range, and avoid overloading the goods to prevent sideslip or turnover accidents.
As a professional supplier focusing on BYD electric forklifts, we are Jianxin New Energy, and we have rich experience in providing suitable electric forklift products and supporting service plans for different types of cold storage facilities. If you have relevant demand for cold storage electric forklifts, you can contact us via email at [email protected] for more professional customized consultation.
.jpg)
