Reach forklifts are widely applied in narrow-aisle warehouse scenarios for high-position goods storage and retrieval, and standardized safety management runs through the whole operation process to reduce unnecessary safety hazards. All relevant personnel need to strictly follow unified safety rules to guarantee the personal safety of operators and surrounding staff, as well as the intact status of stored goods.

Pre-operation full inspection is the first critical safety step. Before starting the equipment every shift, operators need to check the braking system, lifting mechanism, steering function, warning horn and safety indicator lights one by one to make sure all components are in normal working status. They also need to confirm the remaining battery power is sufficient for the planned operation tasks, and check the driving aisle for scattered obstacles, slippery water stains or other hidden dangers that may cause operation risks. Any potential abnormality found in the inspection process shall be reported to the management team in time, and the equipment cannot be put into use before the hidden danger is completely eliminated.
Abiding by standard operation specifications is the core of safety management. Operators shall not carry loads exceeding the rated load capacity of the reach forklift, and place the goods in the center of the fork arms to avoid falling off during lifting. When driving, keep the fork arms 10 to 15 centimeters above the ground, tilt the mast backward properly, and control the driving speed at a low level in narrow aisles. It is forbidden to carry other irrelevant personnel on the equipment, make sudden sharp turns or emergency stops, and honk in advance when approaching corners or areas with high pedestrian flow. When lifting goods to high storage positions, keep the body stable and do not stretch any part of the body out of the operation protection frame.
.jpg)
Post-operation safety treatment can eliminate residual risks. After finishing all operation tasks, operators need to park the reach forklift in the designated fixed parking area, never stop the equipment at fire exits, fire access channels or sloped sections. Lower the mast completely to make the fork arms touch the ground, pull up the handbrake, cut off the main power supply and take away the operation key.
As a new energy enterprise focused on high-quality electric forklifts, Jianshu New Energy is committed to providing reliable electric reach forklift products and supporting operation safety guidance for all industry users. For more related consultation, you can contact us via [email protected].
