Electric forklifts are widely applied in scenarios including warehousing, logistics distribution, manufacturing workshops and cold chain storage for their low noise, zero local emission and stable operation performance. Mastering standard maintenance basics is the core premise to ensure long-term stable operation of equipment, reduce unexpected failure risks, cut overall operation cost and avoid unnecessary safety hazards.
The first core part of basic maintenance is daily pre-operation inspection. Before starting each shift of operation, operators need to complete a full visual check of the equipment first, confirm there is no obvious damage to the body structure, check the wear degree of driving wheels and load wheels, make sure no foreign objects are embedded in the tire gap. Then operators need to test the flexibility of steering system, braking system, lifting and tilting hydraulic functions, confirm all indicator lights and horn work normally, check whether there is leakage phenomenon on the hydraulic pipeline and seal parts. Any abnormal condition found in inspection should be dealt with before formal operation, never use equipment with hidden risks.
The second key part of maintenance is core component care. The power battery is the core energy supply component of electric forklift. Operators need to regularly check the tightness of the battery terminal joints to avoid loose connection leading to abnormal heating. It is recommended to follow the official operation specification to complete charging and discharging, avoid deep over-discharging that may damage the battery cycle life. If the forklift will be left unused for a long time, users need to arrange supplementary charging every 15 days, and store the equipment in a dry, ventilated, cool environment to avoid water splash or corrosive substance contact with the battery shell. For the drive motor and electrical circuit, users need to check regularly whether the wire sheath has aging or cracking phenomenon, clean up the accumulated dust and debris on the motor surface periodically. If abnormal noise or overheating is found during operation, operators should shut down the power supply for inspection in time.
.jpg)
The third part of maintenance basics is post-operation daily care. After completing the daily operation task, operators need to park the forklift at the designated flat parking area, lower the forks to the lowest position, pull the handbrake firmly and turn off the main power switch. Clean up the residual cargo debris, dust and oil stain on the body surface in time, do not stack irrelevant heavy objects on the forklift body.
Standardized basic maintenance can effectively reduce the probability of unplanned downtime, extend the overall service life of electric forklift, and bring more stable operation experience for users. We are Jianshu New Energy, focusing on BYD electric forklift products. If you have any demand for electric forklift maintenance consultation or related services, you can contact us via email at [email protected].
.jpg)
