Reach forklift is a widely used material handling equipment specially designed for narrow aisle warehouse scenarios, which can effectively save warehouse space and support high-position stacking and retrieval of goods on high shelves. Compared with ordinary counterbalanced forklifts, it has smaller turning radius and higher operation flexibility, which is very suitable for most modern e-commerce, manufacturing spare parts storage and retail distribution center scenarios. For new operators who get in touch with this equipment for the first time, it is necessary to master standard operation specifications to ensure operation efficiency and personnel safety.
Before every shift of operation, operators need to complete a full range of pre-use checks first. First, confirm the remaining power level of the equipment to ensure it can support the full shift of operation without sudden power off. Then check the surface of tires for obvious damage or foreign matter stuck in the gap, confirm the hydraulic pipeline has no leakage, all control levers can rebound smoothly after being pulled, and the safety belt and emergency stop button function normally. Before formally starting the equipment, you also need to check the surrounding operation area, clear the sundries stacked on the passage, and confirm that the width of the driving channel meets the passing requirement of the reach forklift.

After getting on the vehicle, adjust the seat position to a proper state that you can easily reach all control levers, fasten the safety belt before starting the power system. It is strictly forbidden to carry extra personnel on the working platform or stand on the forks to lift personnel for high-place operation. For new operators, it is recommended to carry out adaptive training in an open empty area without other personnel at first, test the lifting, stretching and moving functions with small amplitude, and start formal operation after you are familiar with the operation logic. When the forks are lifted to a high position, you need to pay close attention to the overhead obstacles such as exposed pipes and protruding shelf structures in the operation area, slow down in advance when turning, and avoid sharp steering at high speed.
.jpg)
After each operation task, you need to lower the forks to 10 to 15 cm above the ground, pull the handbrake, cut off the power supply of the equipment, and park the vehicle in the designated parking or charging area, do not park the forklift randomly in the middle of the operation passage to block the passage of other personnel and equipment. If you find abnormal noise, operation delay or other abnormal conditions during use, you should stop the equipment in time, report the situation to the management personnel, and arrange professional technical personnel to check and troubleshoot. As a professional supplier focusing on BYD electric forklifts, Jianshu New Energy can provide you with complete operation guidance, after-sales maintenance and other full-cycle services. If you have relevant consultation demands, please contact us via [email protected].
