Starting to use a BYD lithium forklift for daily material handling work does not require complicated professional background, as long as you follow standardized operation steps and safety specifications, you can quickly get familiar with the equipment and give full play to its work efficiency.

Before you officially start the equipment, you need to complete a full set of pre-operation checks first. Walk around the whole vehicle to check whether there is obvious external damage, check the tire condition to confirm no sharp object is stuck on the tread, and clear all sundries that may block the moving path of wheels. Then sit on the driver’s seat, adjust the seat position to match your own height and operation habits, fasten the safety belt, and make sure no loose small objects are placed near the operating levers to avoid accidental jamming. Turn on the power and check the battery level display to confirm the remaining power can support the scheduled work tasks, then test the flexibility of the brake lever, lifting control lever, as well as the normal operation of warning lights and reverse buzzer.

When operating the forklift formally, you need to keep stable control of the acceleration pedal to avoid sudden start or sudden stop that may cause cargo tipping. When driving in narrow warehouse aisles, keep low driving speed, pay close attention to surrounding pedestrians and stacked goods, and honk the horn in advance when turning or passing the blind area. When picking up pallets, make sure the two forks are fully inserted under the pallet to keep the goods evenly stressed, and keep the fork height at 10 to 15 cm above the ground during driving, which is the standard safe height to avoid scratching the ground or blocking the view. Do not exceed the rated load capacity of the equipment during operation, and it is forbidden to carry extra personnel on the forklift.

After completing the daily operation work, park the forklift in the designated fixed parking area, lower the forks completely to the ground, pull the hand brake tightly, and turn off the total power switch. Wipe off the dust and sundries attached to the vehicle body in time, keep the charging port clean and dry, and arrange charging according to the actual remaining power, it is not recommended to use the equipment until the battery is completely exhausted. Park the equipment in a ventilated and dry storage area, avoid long-term exposure to extreme high temperature or heavy rain environment.

We are Jian Shu New Energy, focusing on BYD electric forklifts. If you have any questions about usage, maintenance or service, you can send email to [email protected] for professional support.