When designing a new cold storage facility or upgrading an existing old one, matching core material handling equipment with overall functional layout is the core logic to realize long-term stable operation and control comprehensive operation cost. The 3-wheel electric forklift, with its compact turning radius, flexible operation and low noise performance, is an ideal core handling equipment for small and medium-sized cold storage scenarios, and building the whole facility plan around this equipment can bring considerable practical value for operation parties.
The first core module is the internal aisle width planning. Unlike larger ordinary counterbalance forklifts, 3-wheel electric forklift only needs a narrower operating aisle to complete full load turning and high position stacking operation. When designing the cold storage internal channel, you can set the main operation aisle to 2.8 meters to 3.2 meters according to the actual rated load weight of the equipment, and the storage area secondary aisle can be controlled within 2.6 meters. This design can effectively improve the utilization rate of cold storage limited space, increase the total number of effective storage positions by more than 10% compared with the scheme configured with ordinary large forklifts, and reduce the unit construction cost of each single storage position.
The second core module is the low temperature supporting facility design. 3-wheel electric forklifts used in cold storage usually need to adapt to the working environment below -20℃ for a long time, so the supporting facility design should set up a special electric forklift standby and charging area outside the low temperature operation area. The independent area keeps the temperature between 5℃ and 15℃, which can effectively avoid the continuous low temperature loss of the forklift power battery and internal electrical components, extend the overall service life of the equipment, and reduce the later daily maintenance cost. You can also lay a special non-slip wear-resistant floor in the forklift operation area inside the cold storage, which can reduce the sliding risk of the forklift when carrying goods on the frozen ground, and improve the whole operation safety factor.
.jpg)
The third core module is the operation efficiency matching planning. When building the facility plan around 3-wheel electric forklift, you can reasonably set the height of the shelf to within 6 meters, which can give full play to the stable lifting performance of the 3-wheel electric forklift, and avoid the additional cost of introducing higher special storage and handling equipment. The cargo temporary storage area at the loading and unloading port can also be planned according to the operation rhythm of the 3-wheel electric forklift, so as to realize the seamless connection between the in-warehouse sorting and the external truck loading and unloading link, and reduce the unnecessary waiting time of each operation link.
As Jian Shu New Energy, we focus on providing professional electric forklift solutions including BYD electric forklift for all kinds of cold storage scenarios. If you have relevant demand for cold storage facility planning and supporting equipment selection, you can send your specific demand to our email: [email protected], and our professional technical team will provide you with targeted practical support.
.jpg)
