As a common material handling equipment suitable for narrow aisle high-position storage scenarios, reach forklift's performance matching degree directly affects the overall operation efficiency and long-term use cost of the warehouse. Many operation managers are prone to make mistakes in selection due to lack of reference basis, you can complete the whole selection process step by step according to the following ideas.
The first step is to confirm core operation parameters. Before communicating with the service provider, you need to sort out the basic data of daily operation first, including the minimum width of the working aisle, the maximum lifting height required for high-level storage, the average load weight of daily transported goods, and the maximum daily working hours of the forklift. These data are the core basis for model matching, unreasonable parameter reservation will either lead to insufficient equipment performance or cause unnecessary cost waste.
The second step is to evaluate the actual environmental conditions of the operation site. You need to check the flatness and load-bearing capacity of the ground, whether there are frequent slope sections in the driving route, whether the working space is in a constant temperature normal warehouse, low temperature cold storage, or special site with dust and corrosive substances. After sorting out these information, the service provider can adjust the corresponding protection configuration for the equipment to adapt to the special site needs.
The third step is to verify long-term operational efficiency requirements. You can count the average daily pallet turnover that a single reach forklift needs to complete, the layout of on-site charging points, and the operation habits of the existing driving team, and choose a reasonable battery configuration and operation assistance function scheme, which can effectively reduce the energy consumption cost of long-term use and lower the learning threshold for operators.
The fourth step is to check the complete post-operation support system. Except for the performance of the equipment itself, you also need to confirm the on-site maintenance response speed of the supplier, the spare parts supply cycle, and the free operator training services, which can effectively reduce the possible downtime loss caused by equipment failure in subsequent daily operations.
If you have not yet clarified the matching scheme of your own working conditions, Jian Shu New Energy, which focuses on BYD electric forklifts, can provide free on-site working condition survey and professional selection advice, you can send an email to [email protected] for consultation.
.jpg)

