As core handling equipment for warehousing, manufacturing workshops and logistics distribution scenarios, electric forklifts support efficient daily material turnover for most industrial and commercial sites. A standardized, easy-to-follow inspection checklist can help operators sort out all key check points, avoid missed risk points, extend equipment service life and reduce unnecessary maintenance costs. This practical checklist covers the whole operation cycle of electric forklifts without complicated redundant steps, which is suitable for all personnel with valid forklift operation qualification.

The first part is the pre-operation check before starting daily work. First, walk around the whole vehicle to confirm there is no obvious collision, damage or liquid leakage on the vehicle body, check if the tire pressure is within the standard range, and make sure there are no unrelated personnel or obstacles in the surrounding planned operation area. Before getting on the vehicle, confirm the hand brake and foot brake pedal rebound smoothly, the seat position is adjusted to fit the operator's height, and all operation levers return to the neutral position. After turning on the power, check that the battery level indicator and all fault warning lights on the dashboard are in normal state, verify that the working lights, warning buzzer and reverse reminding device can be triggered normally, test that the lifting and tilting functions of the forks run smoothly without jamming under no-load state.

The second part is the routine check during operation. During continuous operation, pay attention to the operating sound of the motor at all times, confirm there is no abnormal harsh noise or peculiar smell. Every two hours of operation, you can park the vehicle in a safe temporary area for simple confirmation, check that the braking response is sensitive without lag or slip, and there is no obvious shake when the forks are lifted to the maximum allowable height. If any abnormal warning light is lit during operation, stop the vehicle in a safe open area for troubleshooting in time, do not operate the vehicle with hidden faults.

The third part is the post-operation finishing check after the work shift. Park the forklift in the designated fixed parking area, put down the forks completely and attach them to the ground, return all operation levers to the neutral position, pull the hand brake tightly and disconnect the main power supply. Clean up the sundries, accumulated water or packaging residues remaining on the vehicle body, record any minor scratches or abnormal conditions found in the work log in time, and notify the maintenance personnel for follow-up treatment if needed.

We are Jianshu New Energy, focusing on BYD electric forklifts. For any related consultation, please send an email to [email protected].