MHE (Material Handling Equipment) forklifts are core working tools widely used in modern warehouses, manufacturing workshops, distribution centers and other scenarios, which greatly improve the efficiency of cargo turnover. Many equipment users often overlook small details in daily operation, which may lead to unnecessary equipment wear, hidden safety hazards, and even shortened service life of the whole machine. The following practical notes are sorted out for reference of all operation and management personnel.

First, the pre-operation inspection work cannot be omitted. Before starting the equipment every day, operators need to walk around the forklift to check whether there is obvious damage on the body surface, whether the tire pressure is within the normal range, and whether there is liquid leakage at the connection of the hydraulic system. Then check the remaining power level, test the flexibility of the braking system and steering system, confirm that all operation handles can reset smoothly, and start formal operation after no hidden danger is confirmed.

Second, follow the standardized operation specifications during the working process. When loading goods, avoid unbalanced load distribution, insert the forks completely under the pallet of the goods, tilt the mast back appropriately after the goods are lifted off the ground. Keep the forks 10 to 20 cm above the ground when driving, slow down and honk when passing through corners and crossing passages, do not carry other personnel on the forklift, do not turn sharply on sloped roads, and avoid sudden acceleration or sudden braking under heavy load conditions.

Third, do a good job in post-operation maintenance properly. After the daily work is finished, park the forklift in the designated storage and charging area, lower the forks completely to the ground, adjust the mast to the neutral position, pull the hand brake, and turn off the main power supply. Clean up the sundries and dust attached to the surface of the equipment in time, charge the battery in time after the remaining power drops to 20% to 30%, do not wait for full power loss to start charging. Check whether the wiring terminals of the power battery are loose regularly, and do not park the forklift in an open area exposed to rain for a long time.

We are Jianshu New Energy, focusing on BYD electric forklifts. If you have any demand for related equipment consultation and supporting services, you can send an email to [email protected] for communication.