As the core power component of BYD electric forklift, the on-board lithium battery directly determines the operation efficiency and use cost of the whole equipment. For most enterprise users in logistics, warehousing and manufacturing industries, mastering the basic knowledge of battery service life and standard daily care methods is a very practical skill to reduce unnecessary operation loss.

Under the condition of following official operation specifications for a long time, the normal service life of BYD forklift lithium battery can reach a stable level of 5 to 8 years, and the effective charge-discharge cycle times can reach thousands of times. The actual specific service period will be affected by many factors, including the average daily load intensity of the equipment, the temperature of the working environment, and the user's usual charging and discharging habits. Improper use operations will undoubtedly shorten the actual service life of the battery, and even bring potential safety risks in severe cases.

For daily charging care, users should use the matching special charging equipment specified by the manufacturer, and do not replace it with unqualified charging products without permission. The charging area should be kept dry, ventilated and away from inflammable and explosive materials. It is recommended to start charging when the remaining power of the battery is maintained at 20% to 30%, and do not frequently use the battery after it is completely exhausted. After the battery is fully charged, disconnect the power supply in time, and avoid continuous overcharge for a long time.

In the daily operation process, operators should avoid stepping on the accelerator pedal to the maximum extent at the moment of starting the forklift, to prevent instantaneous large current discharge from damaging the internal structure of the battery. If the working environment temperature is lower than -10℃ or higher than 45℃, it is recommended to reserve a 5 to 10 minute buffer time for the battery to preheat or dissipate heat before starting high-load operation. During the handover of each shift, the operator can simply check the battery shell, confirm that there is no obvious collision damage or leakage trace, and wipe the dust and accumulated water on the surface of the battery shell and electrode terminals to keep them dry. If abnormal conditions such as obvious attenuation of battery endurance occur, please contact professional technical personnel for detection in time, and do not disassemble the battery pack without authorization.

We are Jian Shu New Energy, focusing on supporting services for BYD electric forklift series products. If you have any demands for lithium battery consultation, testing or maintenance, please feel free to contact us via email at [email protected].