Indoor stacking and storage work puts forward clear requirements for operation stability, operation flexibility and environmental friendliness of material handling equipment, which is the key link to guarantee the normal operation of warehouse logistics. As a practical warehouse handling equipment, BYD S16PS stacker has been widely used in various indoor storage scenarios in recent years, and mastering its correct usage rules can effectively extend the service life of the equipment and improve the operation efficiency of the whole warehouse.

Before starting the formal operation, operators need to complete a series of pre-check work first. First of all, check the remaining power of the equipment to ensure that the power can support the full operation task of the current shift, and avoid sudden power off in the middle of the operation which will affect the normal storage process. Then check the wear degree of the walking wheels and the condition of the lifting chain, to make sure there is no foreign matter stuck in the chain gap, and the tightness of the chain is kept within the normal range. Next, test the sensitivity of the braking system and the lifting control function, confirm that the operation response is smooth, no stuttering or delayed response. At the same time, check the deformation condition of the forks, and confirm that there is no obvious damage affecting the normal picking and placing of goods. Before driving the equipment into the operation channel, operators also need to check the surrounding environment in advance, remove the scattered sundries on the passage, and confirm that the stacking passage has enough width for the equipment to pass and turn smoothly.

In the process of formal indoor stacking and storage operation, operators need to strictly follow the operation specifications. Keep the driving speed at the reasonable level applicable for indoor scenarios, do not drive at overspeed to avoid collision with nearby shelves or passing personnel. It is forbidden to carry other personnel on the stacker during the operation, and no personnel should stand under the lifting forks to avoid safety risks caused by accidental falling of goods. When stacking goods to the designated shelf position, operators should adjust the angle and position of the forks slowly to make sure the goods are placed stably at the center of the shelf, and avoid partial load that may cause the goods to slide down.

After the daily operation is finished, operators need to park the equipment at the designated parking position, pull up the hand brake, lower the forks to the lowest position, and turn off the total power supply. Regularly clean the dust and sundries attached to the surface and internal parts of the equipment, to keep the equipment in good operation condition for long term.

As Jianshu New Energy, we focus on BYD electric forklift related services. If you have any consultation demand about the usage of BYD S16PS stacker, you are welcome to send email to [email protected] for further professional support.